skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com spring 2006 skyworks proprietary information. products and product information are subject to change without notice. 578 pd09-73, PD09-73LF: two-way 0 power splitter/combiner 0.81?0.96 ghz data sheet parameter frequency min. typ. max. unit frequency 0.81 0.96 ghz insertion loss less 3 db split 0.4 0.6 db isolation 18 25 db input vswr 1.2:1 1.4:1 output vswr 1.3:1 1.5:1 amplitude balance 0.1 0.2 db phase balance 1 3 deg. electrical specifications at 25 c z o = 50 ? , unless otherwise noted features low cost low profile available in small sot-6 package available on tape and reel available lead (pb)-free and rohs-compliant msl-1 @ 260 c per jedec j-std-020 description the pd09-73 is a monolithic two-way in-phase hybrid junction tuned for the 0.81?0.96 ghz band. it offers low loss, high isolation, good input/output matching, and exceptional phase/ amplitude balance. it is available in the sot-6 surface mount package. gnd port 1 port 2 gnd in/sum gnd 12 3 65 4 pin out in/sum port 1 port 2 block diagram innov a tion to g o tm now available for purcha s e online. buy now buy now skyworks offers lead (pb)-free, rohs (restriction of hazardous substances)-compliant packaging. new
power dividers/combiners skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com skyworks proprietary information. products and product information are subject to change without notice. spring 2006 579 power dividers/combiners -4.0 -3.8 -3.6 -3.4 -3.2 -3.0 0.80 0.85 0.90 0.95 1.00 frequency (ghz) insertion loss (db) insertion loss vs. frequency port 1 port 2 0.80 0.85 0.90 0.95 1.00 frequency (ghz) -50 -40 -30 -20 -10 0 isolation (db) isolation vs. frequency 0.80 0.85 0.90 0.95 1.00 frequency (ghz) 1.0 1.1 1.2 1.3 1.4 1.5 output vswr output vswr vs. frequency port 1 port 2 0.80 0.85 0.90 0.95 1.00 frequency (ghz) -0.10 -0.05 0 0.05 0.10 amp. balance (db) amp. balance vs. frequency 0.80 0.85 0.90 0.95 1.00 frequency (ghz) 1.0 1.1 1.2 1.3 1.4 1.5 input vswr input vswr vs. frequency 0.80 0.85 0.90 0.95 1.00 frequency (ghz) -3 -2 -1 0 1 2 3 phase balance (deg.) phase balance vs. frequency typical performance data z o = 50 ? , unless otherwise noted
power dividers/combiners skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com spring 2006 skyworks proprietary information. products and product information are subject to change without notice. 580 characteristic value input power (1) 1.5 w cw input power (2) 0.75 cw operating temperature -40 c to +85 c storage temperature -65 c to +150 c absolute maximum ratings 1. when used as a power divider with a 2.0:1 maximum vswr on all ports. 2. when used as a power combiner with a 2.0:1 maximum vswr on all ports. performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, esd (electrostatic discharge) can damage this device. this device must be protected at all times from esd. static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times. recommended board layout 0.020 dia. via 3 places 0.075 0.015 typ. 0.039 typ. 0.018 typ. material is 10 mil fr4. sot-6 0.074 (1.90 mm) ref. 0.071 (1.80 mm) 0.052 (1.30 mm) 0.037 (0.95 mm) ref. 0.122 (3.10 mm) 0.106 (2.70 mm) 0.006 (0.15 mm) 0.000 (0.00 mm) 0.057 (1.45 mm) 0.035 (0.90 mm) 0.020 (0.51 mm) 0.014 (0.350 mm) 0.126 (3.20 mm) 0.087 (2.20 mm) pin 6 pin 1 pin 1 indicator 0.022 (0.61 mm) 0.004 (0.10 mm) 0.014 (0.26 mm) 0.004 (0.10 mm) 0.012 (0.30 mm) typ. 5.0 1 5.0 1 re c ommen d e d s ol d er reflow profiles refer to the ?recommended solder reflow profile? application note . t ape an d reel information refer to the ?discrete devices and ic switch/attenuators tape and reel package orientation? application note.
|
